Changing The Udp Port; Setting The Polling Interval; Example - Setting Up Energywise - LEGRAND Server Technology PRO3X User Manual

Changing the UDP Port

This command syntax specifies the UDP port for communications in the Cisco
config:# energywise port <port>
Variables:
<port> is the UDP port number ranging between 1 and 65535.

Setting the Polling Interval

This command syntax determines the polling interval at which the Cisco
config:# energywise polling <timing>
Variables:
<timing> is an integer number in seconds. It ranges between 30 and 600 seconds.

Example - Setting Up EnergyWise

The following command sets up two Cisco
config:# energywise enabled true port 10288
Results:
The EnergyWise feature implemented on the PRO3X is enabled.
The UDP port is set to 10288.
EnergyWise-related features.
®
PRO3X User Guide – Command Line Interface (CLI)
155 of 182
Using the PRO3X Command Line Interface (CLI)
EnergyWise domain.
®
EnergyWise domain queries the PRO3X.
®