Default Measurement Units - LEGRAND Server Technology PRO3X User Manual

Displayed information:
Without the parameter details only the overcurrent protector status and name are displayed.
With the parameter details more overcurrent protector information is displayed in addition to status, such as the rating and
RMS current value.
Date and Time Settings
This command shows the current date and time settings on the PRO3X.
# show time
To show detailed information, add the parameter "details" to the end of the command.
# show time details

Default Measurement Units

This command shows the default measurement units applied to the PRO3X web and CLI interfaces across all users, especially
those users authenticated through remote authentication servers.
# show user defaultPreferences
Note: If a user has set their own preferred measurement units or the administrator has changed any user's preferred units, the
web and CLI interfaces show the preferred measurement units for that user instead of the default ones.
PRO3X User Guide – Command Line Interface (CLI)
19 of 182
Using the PRO3X Command Line Interface (CLI)