Example 4 - In-Depth Pdu Information; Clearing Information; Clear Event Log - LEGRAND Server Technology PRO3X User Manual

Example 4 - In-Depth PDU Information

More information is displayed when typing the show pdu details command. Displayed information varies depending on the
model you purchased.

Clearing Information

You can use the clear commands to remove unnecessary data from the PRO3X.
After typing a "clear" command, press Enter to execute it.
Note: Depending on your login name, the # prompt may be replaced by the > prompt.
Clearing Event Log
This command removes all data from the event log.
# clear eventlog
-- OR --
#
clear eventlog /y
If you entered the command without "/y," a message appears, prompting you to confirm the operation. Type y to clear the
event log or n to abort the operation.
If you type y, a message "Event log was cleared successfully" is displayed after all data in the event log is deleted.
PRO3X User Guide – Command Line Interface (CLI)
40 of 182
Using the PRO3X Command Line Interface (CLI)