Logging Out Of Cli - LEGRAND Server Technology PRO3X User Manual

Example 2 (only one possible command):
Type the first word and initial letters of the second word of the "security strongPasswords" command
a.
-- that is, security str.
b. Then press Tab or Ctrl+i to complete the second word.
Example 3 (more than one possible commands):
Type only the first two words of the "network ipv4 gateway xxx.xxx.xxx.xxx" command -- that is,
a.
network ipv4.
b. Then press Tab or Ctrl+i one or two times, a list of possible commands displays as shown below.
gateway
Type the full command "network ipv4 gateway xxx.xxx.xxx.xxx", according to the onscreen
c.
command list.

Logging out of CLI

After completing your tasks using the CLI, always log out of the CLI to prevent others from accessing the CLI.
To log out of the CLI:
1. Ensure you have entered administrator mode and the # prompt is displayed.
2. Type exit and press Enter.
interface
PRO3X User Guide – Command Line Interface (CLI)
171 of 182
Using the PRO3X Command Line Interface (CLI)
staticRoutes