LEGRAND Server Technology PRO3X User Manual page 65

Setting the Wireless Authentication Method
This command sets the wireless authentication method to either PSK or Extensible Authentication Protocol (EAP).
config:# network wireless authMethod <method>
Variables:
<method> is one of the authentication methods: PSK or EAP.
Method Description
PSK The authentication method is set to PSK.
EAP The authentication method is set to EAP.
Setting the PSK
If the Pre-Shared Key (PSK) authentication method is selected, you must assign a PSK passphrase by using this command.
config:# network wireless PSK <psk>
Variables:
<psk> is a string or passphrase that consists of:
- 8 to 63 characters
- No spaces
- ASCII codes 0x20 ~ 0x7E
PRO3X User Guide – Command Line Interface (CLI)
65 of 182
Using the PRO3X Command Line Interface (CLI)