Network Service Settings - LEGRAND Server Technology PRO3X User Manual

Network Service Settings

This command shows the network service settings only, including the Telnet setting, TCP ports for HTTP, HTTPS, SSH and
Modbus/TCP services, and SNMP settings.
# show network services <option>
Variables:
<option> is one of the options: all, http, https, telnet, ssh, snmp, modbus and zeroconfig.
Option Description
all Displays the settings of all network services, including
HTTP, HTTPS, Telnet, SSH and SNMP.
Tip: You can also type the command without adding
this option "all" to get the same data.
http Only displays the TCP port for the HTTP service.
https Only displays the TCP port for the HTTPS service.
telnet Only displays the settings of the Telnet service.
ssh Only displays the settings of the SSH service.
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP service.
zeroconfig Only displays the settings of the zero configuration
advertising.
PDU Configuration
This command shows the PDU configuration, such as the device name, firmware version, model type and upper limit of active
powered dry contact actuators.
# show pdu
To show detailed information, add the parameter "details" to the end of the command.
# show pdu details
PRO3X User Guide – Command Line Interface (CLI)
16 of 182
Using the PRO3X Command Line Interface (CLI)