Changing The Sensor Description; Using Default Thresholds - LEGRAND Server Technology PRO3X User Manual

Changing the Sensor Description

This command provides a description for a specific environmental sensor.
config:# externalsensor <n> description "<description>"
Variables:
<n> is the ID number of the environmental sensor that you want to configure. The ID number is available in the PRO3X web
interface or using the command "show externalsensors <n>" in the CLI. It is an integer starting at 1.
<description> is a string comprising up to 64 ASCII printable characters, and it must be enclosed in quotes when it contains
spaces.

Using Default Thresholds

This command determines whether default thresholds, including the deassertion hysteresis and assertion timeout, are
applied to a specific environmental sensor.
config:# externalsensor <n> useDefaultThresholds <option>
Variables:
<n> is the ID number of the environmental sensor that you want to configure. The ID number is available in the PRO3X web
interface or using the command "show externalsensors <n>" in the CLI. It is an integer starting at 1.
<option> is one of the options: true or false.
Option Description
Default thresholds are selected as the threshold option
true
for the specified sensor.
false Sensor-specific thresholds are selected as the threshold
option for the specified sensor.
PRO3X User Guide – Command Line Interface (CLI)
135 of 182
Using the PRO3X Command Line Interface (CLI)