LEGRAND Server Technology PRO3X User Manual page 81

Customizing the Date and Time
To manually configure the date and time, use the following CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to customizing the date and time.
Assign the date:
config:# time set date <yyyy-mm-dd>
Assign the time:
config:# time set time <hh:mm:ss>
Variables:
Variable Description
<yyyy-mm-dd> Type the date in the format of yyyy-mm-dd.
For example, type 2015-11-30 for November 30,
2015.
<hh:mm:ss> Type the time in the format of hh:mm:ss in the 24-
hour format.
For example, type 13:50:20 for 1:50:20 pm.
Setting the Time Zone
The CLI has a list of time zones to configure the date and time for PRO3X.
config:# time zone
After a list of time zones is displayed, type the index number of the time zone or press Enter to cancel.
Example
To set the time zone:
1. Type the time zone command as shown below and press Enter.
config:# time zone
2. The system shows a list of time zones. Type the index number of the desired time zone and press Enter.
3. Type apply for the selected time zone to take effect.
PRO3X User Guide – Command Line Interface (CLI)
81 of 182
Using the PRO3X Command Line Interface (CLI)