LEGRAND Server Technology PRO3X User Manual page 160

Mode Description
manual This option enables selection of a different LED color
and LED mode for the specified rack unit.
Setting an LED Color for a Rack Unit
This command syntax sets the LED color for a specific rack unit on the specified asset strip. You need to set a rack unit's LED
color only when the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDColor <color>
Variables:
<n> is the number of the FEATURE port where the selected asset strip is physically connected. For the PRO3X device with only
one FEATURE port, the number is always 1.
<rack_unit> is the index number of the desired rack unit. The index number is available on the asset strip or the Asset Strip
page of the web interface.
<color> is the hexadecimal RGB value of a color in HTML format. The <color> variable ranges from #000000 to #FFFFFF.
Note: A rack unit's LED color setting overrides the global LED color setting on it.
Setting an LED Mode for a Rack Unit
This command syntax sets the LED mode for a specific rack unit on the specified asset strip. You need to set a rack unit's LED
mode only when the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDMode <mode>
Variables:
<n> is the number of the FEATURE port where the selected asset strip is physically connected. For the PRO3X device with only
one FEATURE port, the number is always 1.
<rack_unit> is the index number of the desired rack unit. The index number is available on the asset strip or the Asset Strip
page of the web interface.
<mode> is one of the LED modes: on, off, blinkSlow or blinkFast.
Mode Description
on This mode has the LED stay lit permanently.
PRO3X User Guide – Command Line Interface (CLI)
160 of 182
Using the PRO3X Command Line Interface (CLI)