LEGRAND Server Technology PRO3X User Manual page 117

Examples
This section illustrates several user configuration examples.
Example 1 - Creating a User Profile
The following command creates a new user profile and sets two parameters for the new user.
config:# user create Mary enable admin
Results:
A new user profile "Mary" is created.
The new user profile is enabled.
The admin role is assigned to the new user profile.
Example 2 - Modifying a User's Roles
The following command assigns two roles to the user "May."
config:# user modify Mary roles admin,tester
Results:
The user Mary has the union of all privileges of "admin" and "tester."
Example 3 - Default Measurement Units
The following command sets all default measurement units at a time.
user defaultpreferences preferredTemperatureUnit F preferredLengthUnit feet
preferredPressureUnit psi
Results:
The default temperature unit is set to Fahrenheit.
The default length unit is set to feet.
The default pressure unit is set to psi.
Role Configuration Commands
A role configuration command begins with role.
PRO3X User Guide – Command Line Interface (CLI)
117 of 182
Using the PRO3X Command Line Interface (CLI)