Server Reachability Information For A Specific Server; Show History - LEGRAND Server Technology PRO3X User Manual

Server Reachability Information for a Specific Server

To show the server reachability information for a certain IT device only, use the following command.
# show serverReachability server <n>
To show detailed information, add the parameter "details" to the end of the command.
# show serverReachability server <n> details
Variables:
<n> is a number representing the sequence of the IT device in the monitored server list.
You can find each IT device's sequence number using the CLI command of show serverReachability as illustrated
below.
Displayed information:
Without the parameter details only the specified device's IP address, monitoring enabled/disabled state and current status
are displayed.
With the parameter details more settings for the specified device are displayed, such as number of pings and wait time prior
to the next ping.
Command History
This command shows the command history for current connection session.
#

show history

Displayed information:
A list of commands that were previously entered in the current session is displayed.
PRO3X User Guide – Command Line Interface (CLI)
36 of 182
Using the PRO3X Command Line Interface (CLI)