LEGRAND Server Technology PRO3X User Manual page 84

Determine the default IPv4 firewall control policy for outbound traffic:
security ipAccessControl ipv4 defaultPolicyOut <policy>
IPv6 commands
Enable or disable the IPv6 firewall control feature:
security ipAccessControl ipv6 enabled <option>
Determine the default IPv6 firewall control policy for inbound traffic:
security ipAccessControl ipv6 defaultPolicyIn <policy>
Determine the default IPv6 firewall control policy for outbound traffic:
security ipAccessControl ipv6 defaultPolicyOut <policy>
Variables:
<option> is one of the options: true or false.
Option
true
false
<policy> is one of the options: accept, drop or reject.
Option
accept
drop
reject
Tip: You can combine both commands to modify all firewall control parameters at a time.
Description
Enables the IP access control feature.
Disables the IP access control feature.
Description
Accepts traffic from all IP addresses.
Discards traffic from all IP addresses, without sending
any failure notification to the source host.
Discards traffic from all IP addresses, and an ICMP
message is sent to the source host for failure
notification.
PRO3X User Guide – Command Line Interface (CLI)
Using the PRO3X Command Line Interface (CLI)
84 of 182