LEGRAND Server Technology PRO3X User Manual page 130

Adding a Radius Server
You can repeat the following commands to add Radius servers one by one.
Command syntax:
authentication radius add <host> <rds_type> <auth_port> <acct_port> <timeout>
<retries>
Variables:
<host> is the IP address or host name of the Radius server.
<rds_type> is one of the Radius authentication types: pap, chap, msChapV2.
Type
chap
pap
msChapV2
<auth_port> is the authentication port number.
<acct_port> is the accounting port number.
<timeout> is the timeout value in seconds. It ranges between 1 to 10 seconds.
<retries> is the number of retries. It ranges between 0 to 5.
To enter the shared secret:
6. After executing the above Radius command, the system automatically prompts you to enter the shared secret.
7. Type the secret and press Enter.
8. Re-type the same secret and press Enter.
Example:
authentication radius add 192.168.7.99 chap 1812 1813 10 3
Description
CHAP
PAP
MSCHAP v2
PRO3X User Guide – Command Line Interface (CLI)
Using the PRO3X Command Line Interface (CLI)
130 of 182