Setting The Automatic Daylight Savings Time - LEGRAND Server Technology PRO3X User Manual

Setting the Automatic Daylight Savings Time

This command determines whether the daylight saving time is applied to the time settings.
config:# time autoDST <option>
Variables:
<option> is one of the options: enable or disable.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.
Examples
This section illustrates several time configuration examples.
Example 1 - Time Setup Method
The following command sets the date and time settings by using the NTP servers.
config:# time method ntp
Example 2 - Primary NTP Server
The following command sets the primary time server to 192.168.80.66.
config:# time ntp firstServer 192.168.80.66
PRO3X User Guide – Command Line Interface (CLI)
82 of 182
Using the PRO3X Command Line Interface (CLI)