LEGRAND Server Technology PRO3X User Manual page 97

IPv6 commands
Enable or disable the IPv6 role-based access control feature:
security roleBasedAccessControl ipv6 enabled <option>
Determine the IPv6 role-based access control policy:
security roleBasedAccessControl ipv6 defaultPolicy <policy>
Variables:
<option> is one of the options: true or false.
Option Description
true Enables the role-based access control feature.
false Disables the role-based access control feature.
<policy> is one of the options: allow or deny.
Policy Description
allow Accepts traffic from all IP addresses regardless of the
user's role.
deny Drops traffic from all IP addresses regardless of the
user's role.
Tip: You can combine both commands to modify all role-based access control parameters at a time.
Managing Role-Based Access Control Rules
You can add, delete or modify role-based access control rules.
An IPv4 role-based access control command for managing rules begins with security roleBasedAccessControl ipv4 rule.
An IPv6 role-based access control command for managing rules begins with security roleBasedAccessControl ipv6 rule.
PRO3X User Guide – Command Line Interface (CLI)
97 of 182
Using the PRO3X Command Line Interface (CLI)