Setting Network Service Parameters - LEGRAND Server Technology PRO3X User Manual

Setting Network Service Parameters

A network service command begins with network services.
Setting the HTTP Port
The commands used to configure the HTTP port settings begin with network services http.
Change the HTTP port:
config:# network services http port <n>
Enable or disable the HTTP port:
config:# network services http enabled <option>
Enforce redirection from HTTP to HTTPS:
config:# network services http enforceHttps <option>
Variables:
<n> is a TCP port number between 1 and 65535. The default HTTP port is 80.
<option> is one of the options: true or false.
Option Description
▪ The HTTP port is enabled.
true
- OR -
▪ HTTP redirection to HTTPS is enabled.
▪ The HTTP port is disabled.
false
- OR -
▪ HTTP redirection to HTTPS is disabled.
PRO3X User Guide – Command Line Interface (CLI)
71 of 182
Using the PRO3X Command Line Interface (CLI)