2-2
Installation
This section describes the installation of the Main Unit and the infrared thermal sensors.
2-2-1
Precautions at Installation
Refer to the Precautions for Safe Use on page 6.
2-2-2
Installing the Main Unit
For installation of the Main Unit, it is possible to install it on the DIN rail or install it with screws on the
wall.
When Installing on DIN Track
Screw the DIN Track in three or more places in a control cabinet.
Recommended DIN Track
Model
PFP-100N
PFP-50N
PFP-M End Plate (2 Pieces)
Installation Direction
There is no particular restriction on the mounting direction of the Main Unit, but install it securely in
the horizontal or vertical direction as much as possible.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Dimensions
Manufacturer
1,000 mm
OMRON
500 mm
2 Installation and Wiring
2
2 - 3