Omron K6PM-TH User Manual page 177

(1)-2 Editing tag set
To enter tags, there are tabs for Input (Consume) and Output (Produce), but set only the
Input (Consume) tab when connecting the K6PM series.
For editing tag set, click New (N) ... in the following Edit Tag Set Dialog Box.
The Edit Tag Set Dialog Box is displayed.
Enter the tag set name, select from the candidate tag list the tag to be a member, and add it
by clicking the
After adding a member, you can register tag set by clicking Register (R).
In this example, we set "t_K6PM_Monitor_Data1" to "t_K6PM_Monitor_Data4" as the tag
set name.
Additional Information
If you add a tag without specifying a tag set name and click Register (R), the tag name at the
top of the tag list is automatically entered as the tag set name.
Continue to edit tag sets. Click Close (C) to end tag set editing.and return to the Edit Tag
Set Dialog Box.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
(add tag) Button at the center or by double-clicking it.
Appendices
A
A - 21