Table of Contents
Advertisement
Precautions for Correct Use
(11) Refer to 2-2-3 Installation of the Infrared Thermal Sensor on page 2-5 to install the sensor cor-
rectly. If the sensor is not correctly installed, the temperature may not be measured properly.
(12) Do not disassemble the sensor. It may not operate correctly.
(13) Be careful of incorrect wiring or short circuit for wiring.
(14) In the case of insertion and removal of connector, be sure to do it by holding the connector with
hands.
(15) Do not remove the connector with holding the cable.
(16) Do not wire with wet hands. It may result in operation failure or product damage when power is
being supplied to the product.
(17) When fitting the connector, be sure to do it with hands, not to use tools. It may result in damages if
the tool like plier is used.
(18) When removing the connector from the sensor, make sure that water or dirt does not adhere to the
mating face of the connector. It may result in faulty contact at the connector.
(19) Install cables to avoid any force is applied to the connector. In case the any force is applied to the
connector, it causes that the performance of protection structure becomes incapable.
(20) Do not mount the way that the force is directly applied to the fitting part of the connector or the root
part of the cable connection. It may result in connector damage or cable disconnection.
(21) Do not use the connector as a scaffold or put heavy objects on it. It may result in connector dam-
age.
(22) Fix the sensor with screws before using it. In case of using unfixed one, it is in the condition that
force is easily applied to the cable, and the cable may be broken.
(23) Make sure that the DIP switches are set as intended before you close the DIP switches cover.
(24) To increase the accuracy of temperature measurement, install the sensor at a distance where the
measurement object is as close to the center of view as possible and can be imaged as large as
possible.
10
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Advertisement
Table of Contents
