A-1-3 Software Tool - Omron K6PM-TH User Manual

A-1-3 Software Tool
Item
Project
Sampling cycle of infrared thermal sensor: 1 to 99
Logging
1 Number that can be reg-
istered in the project
Files to create
Photo image file format that can be read and displayed JPG/JPEG format
Temperature alarm threshold automatic setting
 Details of the File to be Created
File type
Project file .ini
Configuration .ini
file
Log file .txt
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Number of files that can
be created
Supported file format
Measurement interval
Log file unit
Number of Main Units
Extension
Text file including the following:
• Sampling cycle
• Device name (of 5 Units max.)
• IP address information of Main Unit (of 5 Units
max.)
• Sensor image display direction (of 31 Units max.)
• Sensor color scale setting (of 31 Units max.)
• Measurement location image file name (of 31 Units
max.)
Text file including the following (file name = fixed as
"app.ini"):
• Language
A file is created for each Main Unit.
It is text file format, so it can be used by other appli-
cations.
Refer to 4-2-3 Automatic Saving Log Files on page
4-19 for details.
Specification
No limit
1 to 99 minutes, or 1 to 99 hours (default value: 1 min-
ute)
Tab-delimited text file format
Sampling cycle
A new file for every 1,440 rows (excluding the header)
regardless of the sampling interval
5 Units max.
The following are created in the installation folder \cfg:
• Project file (INI file format)
• Configuration file (INI file format)
The following is created in the installation folder \log:
• Log file (txt format)
Refer to Details of the File to be Created on page A-9
under for details.
Supported
Description
Appendices
Save position by default
C:\Program
Files\OMRON\Thermal
Condition Monitoring
Tool\cfg
C:\Program
Files\OMRON\Thermal
Condition Monitoring
Tool\cfg
C:\Program
Files\OMRON\Thermal
Condition Monitoring
Tool\log\[Main Unit num-
ber (2 digits)]
A - 9
A