Table of Contents
Advertisement
A
B
D
E
Symbol
A
Device Name
B
IP address
C
IP settings Button
D
Setting value
E
Write Button
F
Sensor No.
G
Connection
H
Position error
I
Description
J
Start monitoring Button
K
Device List Button
4
If the initial settings of the Main Unit and the sensor configuration are correct, the registration of
all sensor positions is complete, and angle deviation of the sensors has not occurred, click the
Start monitoring Button. As a result, the Main Unit enters the monitoring mode.
Precautions for Correct Use
Before clicking the Start monitoring Button, be sure to perform position registration of all infra-
red thermal sensors. For details on how to register the sensor position, refer to 3-3 Registering
the Sensor Position (Setting sensor screen) on page 3-15.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
C
F
Name
Name of the Main Unit. Default: K6PM_01 to 05 (can be changed)
Up to 32 single-byte characters and 16 double-byte characters.
Displays the IP address.
Used to set the IP address. Click this button to move to the IP address
setting screen.
Used to select each setting item of the Main Unit.
Used to write each setting value of the Main Unit.
This is the sensor number connected to the Main Unit.
Check if the sensor configuration is correct. If normal communications are
performed,
If K6PM-TH sensor angle deviation has occurred, the
played. In such a case, click the Details Button and again adjust the posi-
tion on the Setting sensor screen, and thereafter, register the position.
Used to move to the Setting sensor screen of each sensor number
Use this button to move to the monitoring mode.
Use this button to return to the Device List of K6PM screen.
G
H
I
Description
is displayed.
3 Initial Setting
3
J
K
icon is dis-
3 - 19
Advertisement
Table of Contents
