Omron K6PM-TH User Manual page 127

 Instance Attribute ID
The instance attribute ID specifies the per-instance attribute.
Attribute ID Parameter name
01 hex Interface Configu-
ration Status
02 hex Configuration
Capability
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
5 Monitoring and Setting with the EtherNet/IP Communications
Description
Indicates the IP address settings status
of the interface.
Bits 0 to 3: Interface Configuration Sta-
tus:
0 = IP address is not set. (This includes
when BOOTP is starting.)
1 = IP address is set.
Bits 4 to 31: Reserved (always FALSE).
Indicates a Setup that can be set to the
built-in interface.
Bit 0: BOOTP Client: TRUE (fixed).
Bit 1: DNS Client: FALSE (fixed).
Bit 2: DHCP Client: FALSE (fixed).
Bit 3: DHCP-DNS Update: FALSE
(fixed).
Bit 4: Configuration Settable: TRUE
(fixed).
(Can the Interface Configuration attri-
bute be set?)
Bit 5: Hardware Configurable: FALSE
(fixed).
(Can the IP address be set by the hard-
ware?)
Bit 6: Interface Configuration Change
Requires Reset: TRUE (fixed).
(Is it necessary to restart the device
after changing the Interface Configura-
tion attribute?)
(Is it necessary to restart the device
after changing the Interface Configura-
tion attribute?)
Bit 7: ACD Capable: FALSE (fixed)
(Whether or not ACD function is avail-
able)
Bit 8 to 31: Reserved area FALSE.
Data
Attri-
Default
bute
Data type
value
Read DWORD 1
Read DWORD 00000051
hex
5
5 - 25