Omron K6PM-TH User Manual page 160

Appendices
Item
Ethernet Supported services
communi-
cations
Physical layer
Transmis-
sion specifi-
cations
Tag data
link
Explicit
message
Modbus
message
Factory
default val-
ues
*1. When you use tag data link, explicit message communications, and Modbus message communications simul-
taneously, limit the number of client nodes to 4 or less. If simultaneous communication is carried out with 5 or
more nodes, a timeout may occur due to the communications load.
 Indicator Specifications
Symbol Name
MS Module
Status
A - 4
Model
Transmission speed
Transmission medium
Transmission distance
Class1
*1
Packet interval (RPI)
Timeout value
Connection type
Class 3
*1
UCMM
Modbus TCP
*1
IP address
Subnet mask
Default way
IP address setting method
Color Status
Green Lit
Flashes at 1-s
intervals
Red Lit
Flashes at 1-s
intervals
--- Not lit
K6PM-THMD-EIP
EtherNet/IP (tag data link or CIP message com-
munications)
BOOTP client
Modbus TCP
100Base-TX
100 Mbps
Twisted pair cable (with shield: STP): Category
5 or higher
100 m max. (distance between hub and node)
Connection resource: 4 max.
1,000 to 10,000 ms
Multiples of RPI (4 times, 8 times, 16 times, 32
times, 64 times, 128 times, 256 times, 512
times)
Point To Point Connection (fixed)
Number of clients that can communicate at one
time: 2 max.
Number of clients that can communicate at one
time: 2 max.
Number of clients that can communicate at one
time: 2 max.
192.168.250.30
255.255.255.0
0.0.0.0
Static IP address
Operating condition
Normal status
BOOTP server connection error state
One of the following fatal errors (Main Unit internal error)
• Internal CPU error
• Internal memory error
One of the following conditions
• K6PM-TH sensor communications error
• The detection of the K6PM-TH sensor angle deviation
• Sensor type error
• Temperature measurement range exceeded
• Running time error
No power supply
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)