Omron K6PM-TH User Manual page 170

Appendices
1
Starting the Network Configurator for EtherNet/IP
To start the Network Configurator, select All Programs | OMRON | Sysmac Studio | Network
Configurator for EtherNetIP | Network Configurator from the Windows Start Menu.
The Main Window consists of a Hardware List and a Network Configuration Pane, as shown in
the following diagram.
2
Installing EDS Files
To configure K6PM-TH as an EtherNet/IP tag data link communications target, install the EDS
file containing the configuration information of the K6PM-TH in the Network Configurator. Once
this installation is done, this operation is unnecessary from the next setting.
EDS files can also be downloaded from our website.
Register the CIP revision corresponding to the EIP version on the side label of the Main Unit.
EIP version
Ver.1.0
A - 14
Major revision
1
MAIN: Ver.1.0
EIP: Ver.1.0
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
CIP revision
Revision on the Hardware list
Rev1