Omron K6PM-TH User Manual page 128

5 Monitoring and Setting with the EtherNet/IP Communications
Attribute
Parameter name
ID
03 hex Configuration Control
04 hex Physical Link Object
Path size
Path
05 hex Interface Configuration
IP Address
Network Mask
Gateway Address
Name Server
Nana Server2
Domain Name
06 hex Host Name
0D hex Encapsulation Inactiv-
ity Timeout
*1. Only the Host Name immediately reflects the change in settings. (It is not necessary to reset the power supply
to apply the changes in the setting parameters to the operation)
5 - 26
Description
Sets the method used to set
the IP address when the
interface starts.
0: Static IP address.
1: Set by BOOTP.
The path to the link object in
the physical layer
The path size (WORD size).
The path to the link object in
the physical layer
(Path to the Ethernet Link
object (Class ID: F6 hex))
Interface settings
IP address
Subnet mask.
The default gateway.
The primary name server.
The secondary name server.
The domain name.
*1
The host name (reserved).
Encapsulation session time-
out time
(Timeout time of TCP con-
nection or DLTS connection)
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Data
Attribute
Data type Default value
Write DWORD 00000000 hex
Read Struct of - - -
UINT 0002 hex
Padded 20F6 2401 hex
EPATH
Write Struct of - - -
UDINT Set value (Fac-
tory default:
192.168.250.30)
UDINT 255.255.255.0
UDINT 0.0.0.0
UDINT 0.0.0.0
UDINT 0.0.0.0
STRING 0000 hex. (fixed)
Write STRING 0000 hex. (fixed)
Write UINT 0078 hex (120
seconds)
Setting range: 1
to 3,600 seconds
(0: Prohibited)