Omron K6PM-TH User Manual page 180

Appendices
Select the K6PM series displayed in the registered device list, click New (N) ... or dou-
ble-click the device, the Connection Allocation Dialog Box will be displayed.
The default values of each parameter are displayed, and then set the following items.
• Connection I/O Type
Set the connection to register from the drop-down list. The output tag set is automatically
selected according to the setting.
Input Assembly 100
Input Assembly 101
Input Assembly 102
Input Assembly 103
• Input tag set
Select the tag set name edited in "(1) -2. Editing tag set" from the drop down list and set it.
• Packet Interval (RPI)
From the setting range of K6PM (1000 ms to 10000 ms), set the data send interval from
K6PM according to the system.
• Timeout value
Select the timeout value at the occurrence of a communications error from the pull down list
and set it. The value can be set by multiple of packet interval (RPI). (4 times, 8 times, 16
times, ..., 512 times)
Additional Information
If detailed parameters (i.e., packet interval (RPI), timeout value) are not displayed, it can be dis-
played by clicking Detail View.
A - 24
Connection I/O Type
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Output tag set
Input_100 - [128 bytes]
Input_101 - [380 bytes]
Input_102 - [380 bytes]
Input_103 - [418 bytes]