Omron K6PM-TH User Manual page 70

3 Initial Setting
5
When download to the Main Unit for which the IP address has to be set is successful, the follow-
ing screen will be displayed.
6
Click the Finish Button. The display will return to the Setting K6PM screen.
7
If you click the Device List Button or the Start monitoring Button on the Setting K6PM screen,
the display will return to the Device List of K6PM screen.
Save the Project
If you exit the Device List of K6PM screen by clicking the × Button at the top right of the Device List of
K6PM screen, the Save the project message box shown below will appear.
Click the Save Button or Save As Button to save the project.
A
Symbol
A Save Button
B Save As Button
C Not save Button
D Cancel Button
3 - 14
B C D
Name
Use this button to save a selected existing project in the same file without
opening the File Selection screen.
Use this button to open the File Selection screen, and save the project
information.
Exit the software tool without saving the file.
Use this button to return to the Device List of K6PM screen.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Description