Table of Contents
Advertisement
Appendices
Additional Information
Here, create a symbol that matches the name of the I/O memory address used in the PLC or
the name of the network symbol (input).
Continue to edit tags. Click Close (C) to end tag editing.
As an example, register a tag with the following information:
Tag name: "D00000"
Size: 128 bytes
Register the tag according to the required number of connections.
The tags registered are displayed in the Edit Tag Dialog Box.
Click OK in the Edit Tag Dialog to register tags and complete tag editing.
At that time, if you have created a new tag, the following confirmation message will be dis-
played. To register the tag name as it is as the tag set name, click Yes (Y). If you register
the tag name as it is as the tag set name, one tag is registered as one tag set. Here, when
selecting Yes (Y), you can omit "(1) -2. Editing tag set" for the newly created tag.
A - 20
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Advertisement
Table of Contents
