Omron K6PM-TH User Manual page 68

3 Initial Setting
Symbol
Select the connecting method
A
to device.
IP address at Fixed IP Con-
B
nection
C Next Button
D Cancel Button
2
Select either "Automatic Connection" or "Fixed IP Connection", and click the Next Button.
If you select "Fixed IP Connection", enter the IP address of the target Main Unit.
The following tab page is displayed.
Symbol
A Connect Button
B Progress bar
C Cancel Button
3 - 12
Name
Select the connection method from below.
• Automatic Connection
• Fixed IP Connection
If you select a fixed IP connection, enter the IP address of the target
Main Unit here.
Use this button to proceed to the next screen.
Use this button to close this screen and return to the Setting K6PM
screen.
B C A
Name
Use this button to start a connection.
A green bar with "Connecting" displayed under it will be displayed
while a connection is being established with the Main Unit.
Use this button to close this screen and return to the Setting K6PM
screen.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Description
Description