Symbol
(H)
Screw hole for fixing mounting bracket For direct sheet metal attachment
(I)
Screw fastening hole
DIP Switch Settings
The setting contents of the DIP switch pin are as follows:
SW
1 to 5
6
7
8
Precautions for Correct Use
When closing the cover of the sensor DIP switch pin, make sure the DIP switch pin settings
have been made as intended.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Name
Setting contents
K6PM-TH sensor number set-
ting
RS-485 terminating resistance
The detection of the K6PM-TH
sensor angle deviation
Reserved.
Function
1/4-20 UNC mounting hole (nut not included)
Set in binary with ON as 1 and OFF as 0 (Pin 1: Least sig-
nificant bit, Pin 5: Most significant bit)
00001 to 11111: K6PM-TH sensor number 1 to 31
00000: Not used.
Factory default: 00001
OFF: Without terminating resistance (factory default)
ON: With terminating resistance
OFF: No detection (factory default)
ON: With detection
1 Outline
Value
----
1
1 - 17