4 Monitoring the Temperature in Control Panel with the Main Unit and the Software Tool
*1. Blinks when over due to arrival prediction function.
Setting the Sampling Cycle
Before monitoring the Main Unit with the software tool, set the sampling cycle of the software tool on
the System setting Dialog Box.
The range that can be set is from 1 to 99 minutes or from 1 to 99 hours. The default is 1 minute.
1
On the Device List of K6PM Screen of the software tool, click the System setting Button.
2
In the System setting Dialog Box shown below, set the sampling cycle and then click the OK
Button.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Click here.
Set the numeric value with the spin box.
Select the unit from "min" and "hour".
4
4 - 7