Omron K6PM-TH User Manual page 54

2 Installation and Wiring
Recommended Ethernet Cables/connectors
Part name
Ethernet cable
RJ45 connector
*1. We recommend use of these cables and connectors in the above combinations.
Note In the default setting state, the Main Units are connected one-to-one by Ethernet cable without using
a switching hub.
 Recommended Ethernet Switches
Ethernet switches are recommended for use in environments that can be used in FA environments
and devices that can use QoS (Packet Priority Control) dedicated to EtherNet/IP.
The following are recommended items.
Manufacturer
OMRON
Cisco Systems, Inc
Contec USA, Inc.
Phoenix Contact USA
2 - 18
Manufacturer
Hitachi Metals, Ltd.
Panduit Corp.
Software tool
Industrial switching hub (e.g., W4S1) (See note)
Ethernet
Infrared thermal sensor
Model
W4S1-03B Packet priority control (QoS): EtherNet/IP control data priority
Failure detection: Broadcast storm, LSI failure detection
W4S1-05B
100Base-TX/10Base-T, Auto negotiation
W4S1-05C
Number of ports:
three for the W4S1-03B, or five each for the W4S1-05B and W4S1-05C
Failure detection output (W4S1-05C only)
Consult the manufacturer.
https://www.cisco.com/
Consult the manufacturer.
https://www.contec.com/us/
Consult the manufacturer.
https://www.phoenixcontact.com/online/portal/pc
NETSTAR-C5E SA 0.5×4P
MPS588-C
PC
EtherNet/IP or Modbus TCP
· · ·
Description
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Model
*1
*1
PLC
Main Unit
· · ·