Omron K6PM-TH User Manual page 64

3 Initial Setting
IP Address Settings Example
When using Ethernet for the first time, if you set the IP address and subnet mask of the computer and
Main Unit as below, it is possible to connect the software tool to the Main Unit.
Device name
Computer
Main Unit 1st Unit
Main Unit 2nd Unit
Main Unit 3rd Unit
:
Main Unit 30th Unit
When the subnet mask is "255.255.255.0", the range of IP addresses that can be set for the devices
192.168.250.1 to 192.168.250.254. Assign IP address in this range to each Main Unit.
The same IP address can not be assigned to more than one device.
The default value of the IP address of type Main Unit is "192.168.250.30" common to all models.
When subnet mask set for the all devices is "255.255.255.0",
each of devices having an IP address within the range of 192.168.250.1 to 192.168.250.254
can communicate via Ethernet as the devices are to exist on the same network (segment).
Network of 192.168.250.×××
IP address of your PC:
192.168.250.100
Ethernet communications
can be performed because
the Main Units are in the
same network.
Main Unit
IP address: 192.168.249.1
3 - 8
IP address
192.168.250.100
192.168.250.1
192.168.250.2
192.168.250.3
:
192.168.250.30
Ethernet communica-
tions can not be
performed because
the Main Units are in
a different network.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Sub-net mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
:
255.255.255.0
Network of 192.168.249.×××
Main Unit
IP address: 192.168.249.1
Default gateway
Blank
No change required
(0.0.0.0)
No change required
(0.0.0.0)
No change required
(0.0.0.0)
:
No change required
(0.0.0.0)