A-3-3 Using The Nj/Nx-Series - Omron K6PM-TH User Manual

Appendices
5
Downloading settings
Connect online to the originator device and download the configuration settings.
(The EtherNet/IP tag data link communications setting of the K6PM series is fixed, so you do not
need to download it to the K6PM.)
(1) Online
Select the communications interface to use from Option (O) | Select Interface (I) on the
menu bar. (This operation is unnecessary if interface is not changed after interface setting.)
Then, select Network (N) | Connection (C) ... on the menu bar or click
to go online to the EtherNet/IP network.
After online, select the originator device (PLC) to download, right click it and select Param-
eter (P) | Download (D) and download it.
Additional Information
For details on online and download operations, refer to the manual of the originator device.
For detailed settings, refer to the manual of the originator device.
• "SYSMAC CS/CJ Series EtherNet/IP Units Operation Manual (Cat. No. W465)"
A-3-3 Using the NJ/NX-series
With the Sysmac Studio Ver.1.10 or higher, tag data link (EtherNet/IP connection) setting is possi-
ble when using NJ/NX-series PLC as a tag data link originator.
 Creating Network Variables (Input)
Create Input area in the PLC to receive Input data from K6PM devices.
The setting method for the NJ/NX-series PLC is shown below.
1
Starting the SysmacStudio
Start the SysmacStudio in one of the following ways.
• Double-click the shortcut icon of Sysmac Studio on the desktop.
• To start the Sysmac Studio, select All Programs | OMRON | Sysmac Studio | Sysmac Stu-
dio from the Windows Start Menu.
A - 26
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
(Online button)