Configuring Display Settings - Honeywell HEN04112 User Manual

80 | Performance Series Full Poe Embedded NVR Remote User Guide
2.

Configuring Display Settings

Display/GUI Settings
Click Display under SETTING interface to open the Display/GUI settings configuration
interface.
www.honeywell.com/security
Figure 3-48 Holiday Settings Configuration Interface
Click Add New Holiday to add a holiday, enter the holiday details, then click Save.
Figure 3-49 Display Configuration Interface
Table 3-22 GUI Configurations
Configuration
Resolution
Transparency
Time Display/Channel
Display
Description
Select from four options: 1920x1080, 1280x1024 (default),
1280x720, and 1024x768.
Note You need to reboot the NVR to activate changes to the
resolution.
Configure the transparency of the GUI display. Select from
128 to 255.
Click to enable these functions, which display the time and
channel on the video monitor.