Attaching The Ext-2U Shelf To The Rack; Figure 4-34: Raising The Rivet Cap; Figure 4-35: Removing The Rivet - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual
2. Raise the rivet cap by the screwdriver.
3. Remove the rivet with your hand.
4. Repeat steps 1 to 3 to remove the other rivets.
5. Raise the EXT-2U from the NPT-1020 and remove it.
6. Disassemble the pin guides and the H connector from the NPT-1020.

4.8.4 Attaching the EXT-2U Shelf to the Rack

The EXT-2U platform can be mounted in the rack after it has been assembled with the NPT-1020 or added
to a NPT-1020 platform already mounted in the rack.
To attach an EXT-2U platform to an ECI recommended rack:
Fasten the EXT-2U platform to the rack side rails with four M6 screws, washers, and nuts. EXT-2U

platform grounding is achieved by contact when connecting the platform to the rack using rack
mounting brackets.
ECI Telecom Ltd. Proprietary

Figure 4-34: Raising the rivet cap

Figure 4-35: Removing the rivet

Installing Equipment
4-35