Wall-Mounted Frame; Installing The Wall-Mounted Frame; Installing Cable Supports; Figure 5-25: Connecting The Door Grounding Cable - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual

5.13 Wall-Mounted Frame

The wall-mounted frame is another option for installing the NPT-1020 and accessories in SOHO.
The wall-mounted frame is 300 mm high, 600 mm wide, and 350 mm deep. The front transparent cover
protects the NPT-1020 traffic and fiber cables against unintended disconnection or bending.

5.14 Installing the Wall-Mounted Frame

Wall-mounted frame installation includes the following steps:
1. Installing the cable supports
2. Installing the fiber guide tube
3. Preparing the frame installation holes
4. Installing the frame

5.14.1 Installing Cable Supports

Four cable supports are installed in the wall-mounted frame, two on each side. To facilitate installation,
install the cable supports in the frame before attaching the frame to the wall.
To install the cable supports in the frame:
1. Identify the cable supports according to the following figure; use this figure as reference in the
following steps.
ECI Telecom Ltd. Proprietary

Figure 5-25: Connecting the door grounding cable

NPT-1020 Wall-Mounted Installations
5-29