Icp_V35 Connection Data - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual
Table 8-24: ICP_V24 transparent V.24 9-pin D-type connector, pin assignment
Pin Name
1 ---
2 SD (103)
3 RD (104)
4 ---
5 GND
6 ---
7 ---
8 ---
9 ---

8.16 ICP_V35 Connection Data

V.35 interfaces in the SM_V35E are always in DCE mode. One ICP_V35 can serve a single SM_V35E module.
Two M34 female connectors for external interfaces are on the front panel of the ICP_V35.
The following figure identifies the M34 female connector pins as seen when looking into the connector. The
table lists the connector pin assignment for a typical connector and the color of the wire connected to the
corresponding pin in the cables offered by ECI for connecting the tributary connector and a distribution
frame.
Table 8-25: ICP_V35 M34 female connector, pin assignment
Pin Name
A CGND (101)
B GND (102)
C RTS (105)
D CTS (106)
E DSR (107)
F DCD (109)
H DTR (108)
P TD+ (103a)
ECI Telecom Ltd. Proprietary
Function
Not connected
Transmit data
Receive data
Not connected
Receive data
Not connected
Not connected
Not connected
Not connected
Figure 8-13: M34 female connector, pin identification
Function
Case ground
Signal ground
Request to send
Clear to send
Data set ready
Data carrier detect
Data terminal ready
Transmit data +
Direction Wire color
--- ---
Input Brown
Output Brown/Black
--- ---
--- Red
--- ---
--- ---
--- ---
--- ---
Direction Wire color
--- Brown
--- Brown/Gray ring
Input Red
Output Red/Gray ring
Output Orange
Output Orange/Gray ring
Input Yellow
Input Green
Connection Data
8-35