Xdm-100 Traffic I/O Interface Modules; Table 3-1: Shelf Interfaces Capacity - Eci Telecom XDM-100 General Description Manual

XDM® -100

3.6 XDM-100 Traffic I/O Interface Modules

The capability to support and aggregate a wide range of services over a variety of
technologies and media enables operators to deploy the XDM-100 in different
infrastructures. This provides smooth integration with existing and future networks
and enables the XDM-100 to support:
High-order transmission paths for high-order and low-order subnetworks and
♦
for IP networks (for example, LAN to LAN connectivity: GbE ↔ GbE)
Leased lines at various bitrates, from 2 Mbps up to 2.5 Gbps
♦
Data and other digital services
♦
The XDM-100 also supports a wide range of I/O interfaces and Ethernet Layer 2
services, enabling its deployment in transmission networks, as follows:
SDH: E1, E3, DS-3, STM-1 electrical interface, STM-1 optical interface,
♦
STM-4, STM-4c, STM-16, STM-16c
SONET: DS-3, STS-1 (future release), OC-3 optical interface, OC-12,
♦
OC-48
DATA: 10/100BaseT, 100BaseFX, Gigabit Ethernet (GbE)
♦
Additional interfaces are currently in development and will be available in future
releases of the platform.
All electrical and optical I/O interfaces are fully compatible with applicable ITU-T,
Telcordia, and ETSI standards.
The XDM-100 enables flexible assignment of the above I/Os. Any combination of
I/O cards is allowed, provided the total matrix capacity is not exceeded.
Traffic type
2 Mbps
34 Mbps
45 Mbps
STS-1
STM-1/OC-3
STM-4/OC-12
STM-16/OC-48
Ethernet
417006-2005-013-A02

Table 3-1: Shelf interfaces capacity

Ports per
module
21
3
3
3
4
2
1
8
ECI Telecom Ltd. Proprietary
System Characteristics
Max. ports
per shelf
168
24
24
24
48
24
4
16
3-7