Icp_Vf Connection Data - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual

8.14 ICP_VF Connection Data

A single ICP_VF can serve one of the following SM_10E/EM_10E modules:
SM_FXS_8E

SM_FXO_8E

SM_EM_24W6E (Connectors marked CH7 and CH8 are not connected.)

SM_Codir_4_E (Connectors marked CH5 to CH8 are not connected.)

There are eight RJ-45 connectors for external interfaces on the front panel of the ICP_VF. The figure
Ethernet connector, pin identification
connector. The following tables list the pin assignment for a typical connector, when serving each type of
traffic module. These tables also list the color of the wire connected to the corresponding pin in the cables
offered by ECI for connecting the tributary connector and a distribution frame.
Table 8-19: ICP_VF RJ-45 connector, pin assignment for serving SM_FXS_8E or SM_FXO_8E
Pin Name
1 Line A
2 Line B
4-8 ---
Table 8-20: ICP_VF RJ-45 connector, pin assignment for serving SM_EM_24W6E
Pin Name
1 RA1
2 RB1
3 TA1
4 TB1
5 ---
6 ---
7 E1
8 M1
ECI Telecom Ltd. Proprietary
identifies the RJ-45 connector pins as seen when looking into the
Function
Wire A
Wire B
Not connected
Mode Function
4W Channel 1, Rx, wire
A
2W Channel 1, wire A
4W Channel 1, Rx, wire B Output
2W Channel 1, wire B
4W Channel 1, Tx, wire A Input
2W ---
4W Channel 1, Tx, wire B Input
2W ---
--- ---
--- ---
Any Channel 1, E
Any Channel 1, M
Direction
Bidirectional
Bidirectional
---
Direction
Output
Bidirectional
Bidirectional
---
---
---
---
Output
Input
Connection Data
Wire color
Blue/White ring
White/Blue ring
---
Wire color
Blue/White ring
White/blue ring
Green/White ring
White/Green ring
Brown/White ring
White/Brown ring
Orange/White ring
White/Orange ring
8-32