Installation Options - Eci Telecom NPT-1020 Installation And Maintenance Manual

Table of Contents

NPT-1020 Installation and Maintenance Manual

AUTION: Static Sensitive Devices

Proper handling and grounding precautions required

NPT-1020 equipment contains components sensitive to ESD. To prevent ESD damage, strictly

observe all the precautions listed in

cards in their antistatic packaging material until you are ready to install them.

The use of an antistatic wrist strap connected to a grounded equipment frame or rack is

recommended when handling cards and modules during installation, removal, or connection

to internal connectors.

To unpack the equipment:

Place the shipping boxes with the top upwards on a clean flat surface. Cut the sealing tape using a

short knife so as not to damage the internal items, and open the top flaps.

Remove the items contained in the box and inspect each one for damage. Check for loose parts or any

visual damage to the rack, platform, and auxiliary equipment. Also check the integrity of all the

connectors, leads, and cables.

OTE: Do not remove plastic covers from optical connectors until optical cables are

connected to them.

Search the shipping boxes for any additional small items that may be present.

Open each of the module and card packages for inspection, but do not remove the modules/cards

from their individual protective packages until they can be inserted in the platform.

Check the contents of the shipping boxes against the packing list attached to each box. If damaged

parts are detected or if any parts are missing, notify the project manager and your local ECI

representative immediately.

4.5