Disassembling The Ext-2U From The Npt-1020; Figure 4-32: Removing The Ext-2U From The Npt-1020; Figure 4-33: Inserting The Thin Flat-Head Tool - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual Installing Equipment

4.8.3 Disassembling the EXT-2U from the NPT-1020

The following is the correct way to disassemble the EXT-2U from the NPT-1020. The EXT-2U is attached to
the NPT-1020 with five snap rivets. You must first remove these rivets before removing the EXT-2U. It is
recommended to use a thin flat tool (like a screwdriver) to raise the rivet caps first, and then remove them.

Figure 4-32: Removing the EXT-2U from the NPT-1020

To disassemble the EXT-2U from the NPT-1020:
1. Insert a thin flat-head screwdriver under the rivet cap.

Figure 4-33: Inserting the thin flat-head tool

ECI Telecom Ltd. Proprietary 4-34