Installing The Npt-1020 In A Wall-Mounted Cabinet; Installing The Interior Components - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual
5.3 Installing the NPT-1020 in a Wall-Mounted
Cabinet
The installation of a NPT-1020 in a wall-mounted cabinet includes the following stages:
1. Installing the wall-mounted cabinet rear panel
2. Installing cabling accessories
3. Installing the NPT-1020 platform and ancillary equipment (three DDFs or two DDFs and an AC CONV
unit)
4. Connecting cables and fibers to the NPT-1020 platform and ancillary equipment
5. Installing the wall-mounted cabinet covers and front door
5.4

Installing the Interior Components

Before you start:
Unpack the wall-mounted cabinet components and perform a visual inspection according to the
instructions in Unpacking and Performing Visual
D
ANGER: Safety cannot be guaranteed if shipping damage is evident! Shipping damage must
be reported to the shipping company and manufacturer immediately upon receipt.
ECI Telecom Ltd. Proprietary
Inspection.
NPT-1020 Wall-Mounted Installations
5-2