Figure 4-21: Odf Open View; Figure 4-22: Odf Fiber Routes - Eci Telecom NPT-1020 Installation And Maintenance Manual

NPT-1020 Installation and Maintenance Manual
2. Hold the end of the swing-out tray and pull it out to gain access to the ODF components.
3. Open the two cover thumb nuts and remove the protective cover from the ODF splice support.
4. Insert the external fibers cable through the protective tube.
5. Route the fiber ends through the cable guides to the splice support area.
6. Identify the adapter panel pigtail to be spliced to each user fiber.
7. Insert splicing sleeves over the pigtail, splice the user fiber to the pigtail, and slide the splicing sleeve
over the splice.
8. Place the splicing sleeve in one of the slots in the splice support.
ECI Telecom Ltd. Proprietary

Figure 4-21: ODF open view

Figure 4-22: ODF fiber routes

Installing Equipment
4-21