NPT-1020 Installation and Maintenance Manual
5.16.1 Installing the Cover Holders
Four holders are installed in front of the wall-mounted frame.
To install the cover holders:
1.
Identify the cover holder positions on the frame according to the following figure.
2.
Insert a holder into the left upper groove on the frame and attach it with an M4 Phill. screw, spring
washer, and flat washer.
3.
Fasten the holder to the frame.
4.
Repeat Steps 2 and 3 to attach a holder to the left lower side of the frame.
5.
Repeat Steps 2 to 4 to install two holders on the right side of the frame.
ECI Telecom Ltd. Proprietary
Figure 5-29: Installing the front cover
NPT-1020 Wall-Mounted Installations
5-36