Connection Via Ethernet - Siemens SINUMERIK 840D sl Function Manual

Machine data
MD11351 $MN_HANDWHEEL_MODULE[3]
MD11352 $MN_HANDWHEEL_INPUT[3]
MD11350 $MN_HANDWHEEL_SEGMENT[4]
MD11351 $MN_HANDWHEEL_MODULE[4]
MD11352 $MN_HANDWHEEL_INPUT[4]
MD11350 $MN_HANDWHEEL_SEGMENT[5]
MD11351 $MN_HANDWHEEL_MODULE[5]
MD11352 $MN_HANDWHEEL_INPUT[5]
Logical base addresses:
Machine data
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [0]
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [1]
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [4]
MD11353 $MN_HANDWHEEL_LOGIC_ADDRESS [5]
4.9.5

Connection via Ethernet

Parameter setting
Parameterization of handwheels connected via Ethernet modules, (e.g. machine control
table "MCP 483C IE") is done with the following NCK machine data:
● MD11350 $MN_HANDWHEEL_SEGMENT[<
● MD11351 $MN_HANDWHEEL_MODULE[<
● MD11352 $MN_HANDWHEEL_INPUT[<
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
When connected via Ethernet module, the hardware segment has always to be entered
as 7 (Ethernet).
When connected via Ethernet module, the hardware module has always to be entered as
1.
on Ethernet handwheel interface
The number of the handwheel slot of the internal Ethernet handwheel interface has to be
entered: 1, 2, ..., 6
Value Description
0 No handwheel parameterized
0 No handwheel parameterized
5th handwheel in NCK
5 Hardware segment: PROFIBUS
6 Reference to logical base address of the handwheel slot of the
3rd MCP
1 1st handwheel in handwheel slot
6th handwheel in NCK
5 Hardware segment: PROFIBUS
5 Reference to logical base address of the handwheel slot of the
4th MCP
2 2nd handwheel in handwheel slot
Value Description
288 Logical base address handwheel slot 1st MCP
304 Logical base address handwheel slot 2nd MCP
330 Logical base address handwheel slot 4th MCP
320 Logical base address handwheel slot 3rd MCP
Handwheel_No. - 1
Handwheel_No._in_NCK - 1
Handwheel_No_in_NCK - 1
>
Manual and Handwheel Travel (H1)
4.9 Start-up: Handwheels
>] = 7
>] = 1
Handwheel slot
>] = <
317