Data Management; Variables - Siemens LOGO! CIM Operating Manual

Change a contact
1. Click
Delete a contact
1. Click
5.4.5

Data management

Data management allows you to manage the variables, messages and data bindings. The
names for variables, messages, and data bindings must be unique.
5.4.5.1

Variables

The variable is defined by variable name, data type, address type and address. This chapter
shows how to create and edit variables that you use to store values in CIM. You can create
variables for all data type UDM permitted.
Add a variable
1. Click 'Add Row' button.
2. Enter the parameters of the variable. You can add maximum 16 variables at most.
Name: A variable name can contain letters, numbers and special characters.
Data type: data type of the variable.
Address type: UDM address type of variable
Address: address in the CIM.
3. Repeat step 1-2 to add all variables you need.
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
for the contact you want to edit, then enter the new value directly.
for the contact you want to delete.
Web-based configuration
5.4 Web pages
49