Table of Contents
Advertisement
from the next accessible DHCP server. When required, via a Remote Desktop Connection, you
can deactivate DHCP for the LAN interface "X1 P1" and assign a fixed IP address.
See also
Prerequisites (Page 19)
7.8
Inserting the connection key on the IPC
To log in to the connectivity module with SIDRIVE IQ, insert the connection key on the IPC in
"MindConnect Bridge".
Prerequisites
• A Remote Desktop Connection has been established from the local service PC to the IPC.
• The IPC is connected with the Internet.
• You have received the email with the connection key for the connectivity module, and have
opened this on the local service PC.
Carefully note that the connection key is only valid for 7 days. After the validity expires, the
connection key can no longer be used to log in the connectivity module with SIDRIVE IQ.
Procedure
1. Copy the connection key from the corresponding email to the IPC.
2. Open the "MindConnect Bridge Configuration" application on the IPC via the Remote Desktop
connection.
Operating Instructions, 06/2020
7.8 Inserting the connection key on the IPC
Commissioning
37
Advertisement
Table of Contents
