5.3
Configuring the PLC
5.3.1
Create a project
Introduction
You create a new project in the following. Within a project, all of the automation tasks required,
for example the hardware configuration and the PLC programming, are performed.
Precondition
● The TIA Portal has been started.
Procedure
1. Click "Create new project" in the portal view.
2. Assign a project name and select the storage location of the project (path).
3. Click "Create".
Result
A new, empty project has been created.
5.3.2
Inserting an MCU
Introduction
A SINUMERIK MCU comprises an open-loop control-specific part (PLC, CP and NCK) and a
PC-specific part (PC system).
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
PLC commissioning
5.3 Configuring the PLC
51