Setting Spindle Parameters - Siemens SINUMERIK 808D ADVANCED Series Commissioning Manual

7.4.3

Setting spindle parameters

The control system controls one analog or digital spindle. You can commission the spindle by setting the relevant machine
data under this commissioning step.
Softkey functions
①
Activates the modified values
②
Resets the value of the selected parameter to default
③
Cancels the last change to the parameter
Relevant machine data
No. Name
31050[1...5] DRIVE_AX_RATIO_DENUM
31060[1...5] DRIVE_AX_RATIO_NUMERA
32020 JOG_VELO
32100 AX_MOTION_DIR
32110[0] ENC_FEEDBACK_POL
35010 GEAR_STEP_CHANGE_ENABLE -
35100 SPIND_VELO_LIMIT
35110[1...5] GEAR_STEP_MAX_VELO
35120[1...5] GEAR_STEP_MIN_VELO
35130[1...5] GEAR_STEP_MAX_VELO_LIMIT
35140[1...5] GEAR_STEP_MIN_VELO_LIMIT
36200[1...5] AX_VELO_LIMIT
Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
④
Switches to "MDA" mode for program test
⑤
Returns to the last step
⑥
Proceeds to the next step
Unit Range
- 1 to
2147000000
- 1 to
2147000000
rpm -
- -1 to 1
- -1 to 1
-
rpm -
rpm -
rpm -
rpm -
rpm -
rpm -
Description
Denominator load gearbox
Numerator load gearbox
Jog axis velocity
Traversing direction (not control direction)
-1: Direction reversal
•
0, 1: No direction reversal
•
Sign actual value (control direction)
Parameterize gear stage change
Maximum spindle speed
Maximum speed for gear stage change
Minimum speed for gear stage change
Maximum speed of gear stage
Minimum speed of gear stage
Threshold value for velocity monitoring
215